5 Things to Know About Using a Robotic Pool Cleaner With a Solar Cover

You should remove the solar cover before running the robot Most robotic cleaners can get tangled in the cover’s bubble sheet or trapped underneath if the cover shifts.

Some robots will climb on top of the cover Aggressive models can push the cover around, which messes up water temperature and may tear the cover.

Removing the cover takes only 30 seconds Pull it off, let the robot clean for a couple hours, then put it back on. This saves you from fishing out a tangled robot.

Securing the cover with straps or a reel helps If you must leave the cover on, make sure it’s fastened down and that your robot doesn’t tend to climb.

Just taking the cover off is the safest option It is the practical move that avoids damage and hassle.