Automotive battery starting ram usually

3 Things to Know About Installing New RAM

  1. New RAM usually works at default speeds without any BIOS changes The system will auto-detect the sticks and run them at 2133MHz or 2400MHz by default.

  2. You must enable XMP or DOCP to reach the RAM’s rated speed For Intel systems, enable XMP in the BIOS; for AMD, enable DOCP. This is a single setting, not a full reset.

  3. If the system won’t boot after installation, clear the CMOS Remove the motherboard battery or use the CMOS jumper. You should not need this for a straightforward swap.

As an Amazon Associate I earn from qualifying purchases.

Explore

Explore

Explore